SINGLE BOTTOM REVERSIBLE PLOUGH

Single Bottom Reversible Plough has been designed and developed in Heavy Duty models to perform primary tillage operations satisfactory at any soil conditions providing deep opening and loosening of the soil. It can be attached easily to a tractor through three point linkage and operated with the help of tractor hydraulic Usage of heavy duty main shaft, wear hardening technology in clutch box & special manganese steel share points increases the life of the plough.The plough can cut thrash and buries it completely as well as it can cut heavy soil clods into small particles and give complete inversion of the soil.

SPECIAL FEATURES

» Developed first time with Heavy Duty Models in India. » Heavy Duty 100 mm main shaft used in Heavy Duty Models » Extra Heavy Ribbed Tynes used in Heavy Duty Models to provide higher strength to tines. » Work Hardening technology in clutch Box and Arc Lever for longer life. » Lower cost of maintainance. » Lesser load to tractor and lesser fuel consumption. » Hardened spring steel cutting blades used for wear resistance and longer life. » Special Manganese steel points used to provide wear resistance to points. » Easy to attatch to tractor with Three point linkages. » Automatic furrow change system and can be operated easily. » It can be used for ploughing as well as general purspose at level lands and even in strip farming at hilly areas.

MODELS & SPECIFICATIONS

MODELS & H.P. OF THE TRACTORS PARTICULARS CUTTING DEPTH in mm. CUTTING WIDTH in mm. WEIGHT in Kgs. CHETAK SPECIAL (For 35 HP & AboveTractors) Used 100 mm shaft and Heavy Duty Tines 410 450 250 ECONOMY (For 35 HP to 45 HP Tractors) Used 80 mm shaft and Medium Duty Tines 350 425 225 ROYAL-25 (For 23 HP to 35 HP Tractors) Used 80 mm shaft and Medium Duty Tines 325 325 190 YUVARAJ (For 18 HP to 22 HP Tractors) Used 70 mm shaft and Medium Duty Tines 190 275 110

REVERSE FORWARD BLADE

Reverse Forward Blade is ideal for leveling, filling, back filling and farmyard cleaning etc. Provision for usage in front as well as reverse direction ensures satisfactory front and back filling and leveling of the land. Sharp edged hardened blades cuts weeds, clods, thrashes and uneven lands easily performing above expectations.  

SPECIAL FEATURES

» Sturdy main frame to resist heavy tensile loads. » Thicker sheets to provide tearing resistance. » Sharp edged hardened blades for easy cutting. » Easy to mount on tractor by three point linkages and easy to use. » Readily available spare parts and easily interchangeable.

MODELS & SPECIFICATIONS

MODEL WIDTH in mm. LENGTH in mm. HEIGHT in mm. WEIGHT in Kgs. RFB 1850 770 1125 180

SEEDS CUM FERTILIZER DRILL

SEEDS CUM FERTILIZER DRILL is a Tractor Hydraulic operated implement that can perform Cultivation and Seeds Sowing operations simultaneously and satisfactorily at any soil conditions. Two separate bowl type openings have been provided for sowing seeds and Fertilizers separately through Flexible Tubes connected to each tines. Rate of flow Seeds and Fertilizers can be controlled manually by persons by sitting on the Wooden bench attached to the mainframe.  

SPECIAL FEATURES

» Easy to mount on tractors by three point linkage system. » Sturdy Mainframe to resist heavy bending loads. » Sowing depth adjustment with the help of tractor hydraulics. » Can be also used as Tiller ( Cultivator or Kakari ) by detachment of Drills and can also be used for leveling operations by the attachment of Blade Harrow and Leveler Sheet.

MODELS & SPECIFICATIONS

MODELS LENGTH in mm. WIDTH in mm. HEIGHT in mm. UNDER FRAME CLEARANCE in mm. WEIGHT in Kgs. 7 TINE 1000 1830 1270 395 237 9 TINE 1000 1830 1270 395 260

THREE FURROW SURRY RIDGER

THREE FURROW SURRY RIDGER comes with a longer, heavy and sturdy mainframe construction to resist heavy bending loads acting during its operation covering wide land area with more surries and ridges. Heavy duty furrows have been provided and inclined at an effective angle such that it can penetrate to greater depths to give deep furrow openings and ridges. Adjustable wingspan enables it to vary furrow as well as width of ridges. Hardened share points uproots residues and obstacles easily and breaking clods effectively. Provision for the adjustment of spacing between the furrows makes it useful forming ridges suitable for various types of crops.

SPECIAL FEATURES

» Longer mainframe to cover wide land area. » Heavy Duty sturdy mainframe construction. » Heavy Duty furrows and effective inclination for deeper penetration. » Adjustable wingspan suitable for varying sizes of surries. » Provision of adjustment spacing between furrows suitable for various types of crops. » Hardened sharepoints to uproot residues and break clods easily.

MODELS & SPECIFICATIONS

NO.OF BASES WIDTH in mm. LENGTH in mm. HEIGHT in mm. UNDERFRAME CLEARANCE in mm. WINGSPAN ADJUSTMENT in mm.  WEIGHT in Kgs. 2 Nos 1930 435 1175 570 560 to 725 175 3 Nos 2235 435 1175 570 560 to 725 230

FIVE TEETH FURROW OPENER

Five teeth furrow opener are capable to withstand tough working conditions at heavy soils. With deep positive penetrations can break up hard soil clods and uproot stubbles to leave the ground perfectly worked. With the spacing adjustments of tine on the main frame can be used for multiple number of applications. Even it can be used for paddy cultivation requiring shallow plugging.

SPECIAL FEATURES

» Heavy duty channel used sturdy frame to withstand heavy loads, bending stresses and strains. » Thicker tines to restrain from sudden impact loads. » Sharp edged points to give easier and deeper penetrations with effective uprooting of crop residue and cutting of heavy soil clods at any soil conditions. » Provision for spacing adjustments between tines to be useful for various soil conditions and various crops. » Can be used for uprooting after cutting crops or primary tillage operations before sowing.

MODELS & SPECIFICATIONS

Models Width in mm. Length in mm. Height in mm. Under Frame Clearance in mm. Weight in Kgs. Five Teeth Furrow Opener 1110 1620 1150 566 310

THREE IN ONE ( TILLER WITH HARROWER BLADE AND LEVELER SHEET )

Three In One ( Tiller with Harrower Blade and Leveler Sheet ) is a versatile and multipurpose tiller with its large number of applications. Tiller tines perform primary tillage operations with blade harrow cutting weeds and grass along with leveler sheet does the leveling, completing all the operations done simultaneously saving time and fuel required for these consecutive operations. Easy interchangability and replacement of all the parts enables it for alternate uses.

SPECIAL FEATURES

» Heavy and sturdy mainframe construction. » Heavy duty thicker tines to resist heavy bending loads and thicker sheet to resist heavy tensile loads. » Sharp edged hardened harrower blade for easy cutting of weeds, clods and uneven lands. » Easy interchangability of blades with points to use for only tilling operations alternately. » Provision of space adjustment between tines. » Easy to mount on tractor by three point linkages and easy to use. » Provision to be used alternately as only tiller, leveler and seed drills with adjustments and extra attatchments.

MODELS & SPECIFICATIONS

MODELS PARTICULARS. WIDTH in mm. LENGTH in mm. HEIGHT in mm. UNDERFRAME CLEARANCE in mm. WEIGHT in Kgs. 7 TINE 3 IN 1 For 35 HP to 45 HP TRACTORS 1590 490 1040 470 265 9 TINE 3 IN 1 For 46 HP AND ABOVE TRACTORS 2055 490 1040 470 315

RIGID CULTIVATOR

Rigid Cultivator is capable to withstand tough working conditions at heavy soils. With deep positive penetrations it can break up hard soil and uproot stubbles to leave the ground perfectly worked. With the spacing adjustments of tine on the frame it can be used for multiple no. of applications and even for paddy cultivation requiring shallow ploughing. 

SPECIAL FEATURES

» Heavy duty channel sturdy frame to withstand heavy loads, bending stresses and strains. » Thicker tines to restrain from sudden impact loads. » Sharp edged points to give easier and deeper penetrations with effective uprooting of crop residue and cutting of heavy soil clods at any soil conditions. » Provision for spacing adjustments between tines to be useful for various soil conditions and various crops. » Sharp edged Reversible shovels that gives deeper penetrations at any soil conditions and can be reversed and used on the other side after complete wear of one side. » Can be used for uprooting after cutting crops or primary tillage operations before Sowing.

MODELS & SPECIFICATIONS

MODELS PARTICULARS LENGTH in mm WIDTH in mm HEIGHT in mm. ASSEMBLED ROW WIDTH in mm. UNDER FRAME CLEARANCE in mm. WEIGHT in Kgs. 7 TYNE WITH SHOVELS- HD 7 TYNE WITH DUCK FOOT-HD FOR 25 HP TO 35 HP TRACTORS 1433 605 1015 210 430 185 9 TYNE WITH  SHOVELS- HD 9 TYNE WITH DUCK  FOOT-HD FOR 36 HP TO 50 HP TRACTORS 1843 605 1015 210 430 210

SPRING CULTIVATOR

Spring Cultivator has been designed to deliver sturdy performance at varying soil conditions. Heavy duty channel mainframe and tine assembly resist heavy bending strains. Heavy duty dual springs retain their strength for longer life and ensure safety of shovels from heavy obstacles.

SPECIAL FEATURES

» Heavy duty channel used sturdy frame to withstand heavy loads, bending stresses and strains. » Thicker tines to restrain sudden impact loads. » Positive projection angle of tines to give easier and deeper penetrations with effective uprooting of crop residue and cutting of heavy soil clods. » Dual Springs to provide high tensile strength to each tine to safeguard during heavy shock loads and impact loads. » Sharp edged Reversible shovels that gives deeper penetrations at any soil conditions and can be reversed and used on the other side after complete wear of one side. » Provision for spacing adjustments between tines to be useful for various soil conditions and various crops.

MODELS & SPECIFICATIONS

MODEL PARTICULARS LENGTH in mm WIDTH in mm HEIGHT in mm. ASSEMBLED ROW WIDTH in mm. UNDER FRAME CLEARANCE in mm. WEIGHT in Kgs. 9 TINE HD FOR 35 HP TO 50 HP TRACTORS 2060 763 1100 235 540 275

Rotary Tiller

Rotary Tillers are specially designed to suit all types of crops, fields, where perfect tilling is required. With sturdy structure, heavy duty gear box, heavy duty chain drive and rotors, these are designed to give completely ready soil bed to entire satisfaction to customers and zero maintenance. It can provide a working depth adjustable between 4 to 9 inches and completely leveled land with the help of automatic spring loaded trailing boards. These are available with L-type blades and are designed for 540rpm tractors.

SPECIAL FEATURES

» Sturdy main frame structure to withstand heavy loads. » Heavy duty gear box system. » Heavy duty chain drive system. » Imported high quality blades for more usage life. » Imported high quality heavy duty PTO shafts. » Heavy duty damping spring system for trailing boards for complete leveling of land.

MODELS & SPECIFICATIONS

MODEL WORKING WIDTH  in cms. SUITABLE TRACTORS in HP. WEIGHT  in kgs. NO.OF  BLADES ROT-4 120 35 to 44 410 30 ROT-5 150 45 to 54 435 36 ROT-6 180 55 to 65 460 42

TWO BOTTOM FIXED PLOUGH

Two Bottom Fixed Mould Plough are tractor drawn conventional implement being widely used for primary tillage operations.It can perform toughest ploughing jobs by cutting heavy thrash and burying it completely with deeper penetrations at any hard soil conditions. Extra heavy duty sturdy mainframe construction and usage of wear resistant shares with hardened steel bar points ensure longer life to the plough. These ploughs can be easily attached to a tractor through 3 point linkages and operated with help of tractor hydraulic.

Special features

» No maintenance cost. » No load to tractors. » Easy to operate. » Spares readily available & easily interchangeable.

MODELS & SPECIFICATIONS

MODELS SPECIFICATIONS CUTTING DEPTH in mm. CUTTING WIDTH in mm. WEIGHT in Kgs. 35 HP HD FOR 25 HP TO 35 HP TRACTORS 300 600 200 50 HP HD FOR 36 HP TO 50 HP TRACTORS 350 660 230 60 HP HD FOR 51 HP TO 60 HP TRACTORS 400 710 250

SINGLE BOTTOM REVERSIBLE PLOUGH

Single Bottom Reversible Plough has been designed and developed in Heavy Duty models to perform primary tillage operations satisfactory at any soil conditions providing deep opening and loosening of the soil. It can be attached easily to a tractor through three point linkage and operated with the help of tractor hydraulic Usage of heavy duty main shaft, wear hardening technology in clutch box & special manganese steel share points increases the life of the plough.The plough can cut thrash and buries it completely as well as it can cut heavy soil clods into small particles and give complete inversion of the soil.

Special features

» Developed first time with Heavy Duty Models in India. » Heavy Duty 100 mm main shaft used in Heavy Duty Models » Extra Heavy Ribbed Tynes used in Heavy Duty Models to provide higher strength to tines. » Work Hardening technology in clutch Box and Arc Lever for longer life. » Lower cost of maintainance. » Lesser load to tractor and lesser fuel consumption. » Hardened spring steel cutting blades used for wear resistance and longer life. » Special Manganese steel points used to provide wear resistance to points. » Easy to attatch to tractor with Three point linkages. » Automatic furrow change system and can be operated easily. » It can be used for ploughing as well as general purspose at level lands and even in strip farming at hilly areas.  MODELS & SPECIFICATIONS MODELS & H.P. OF THE TRACTORS PARTICULARS CUTTING DEPTH in mm. CUTTING WIDTH in mm. WEIGHT in Kgs. CHETAK SPECIAL (For 35 HP & AboveTractors) Used 100 mm shaft and Heavy Duty Tines 410 450 250 ECONOMY (For 35 HP to 45 HP Tractors) Used 80 mm shaft and Medium Duty Tines 350 425 225 ROYAL-25 (For 23 HP to 35 HP Tractors) Used 80 mm shaft and Medium Duty Tines 325 325 190 YUVARAJ (For 18 HP to 22 HP Tractors) Used 70 mm shaft and Medium Duty Tines 190 275 110

TWO BOTTOM REVERSIBLE PLOUGH

Two Bottom Reversible Plough has proved its excellent performance in its primary tillage operations by cutting clods much satisfactorily with very deep penetrations into the soil. With continous improvements since decades with a extra heavy 90 mm shaft and sturdy frame construction plough operates satisfactorily at heavy and varying soil conditions. Spring steel hardened cutting blades and share points easily break heavy clods, uproot crop residue and buries them completely giving a leveled land. 


Special Features
 

»	Developed in heavy and extra heavy models for the first time in India.
»	Easy to attatch to the tractors with three point linkages.
»	Extra heavy 90 mm main shaft used.
»	Automatic furrow change system and can be operated easily.
»	Easy to maintain and lower cost of maintainance.
»	Hardened spring steel cutting blades and share points used for longer life.
»	Lesser load to tractors and lesser fuel consumption.
»	It can be used for ploughing as well as general purpose at level lands and even at strip farming at hilly areas. MODELS & SPECIFICATIONS MODELS & H.P. OF THE TRACTORS PARTICULARS CUTTING DEPTH in mm. CUTTING WIDTH in mm. WEIGHT in Kgs. Classic-35 (For 35 HP to 44 HP) 90 mm shaft used 305 to 360 635 to 660 350 Hi-Tech- 45 ( For 45 HP to 49 HP) 90 mm shaft used 310 to 385 660 to 690 360 Delux-50 ( For 50 HP to 54 HP) 90 mm shaft used 325 to 410 690 to 715 370 Premier – 55 (For 55 HP to 59 HP) 90 mm shaft used 360 to 435 715 to 740 390 Unique- 60 (For 60HP & Above) 90 mm shaft used 370 to 460 765 to 810 400

DISC HARROW

Disc Harrow can be mounted on a tractor by three point linkages and controlled by tractor hydraulics. Construction includes mainframe which embedds two gangs of discs mounted one behind another. Front gang cuts and throws soil in inward direction where as rear gang throws cut soil outwards hence complete soil is cut under its width. Its wide applications include primary as well as secondary tillage and it is ideal for preparing seed beds since it can effectively cut heavy clods, crop residues amd mixing them with organic manure completely. It is much used at Field Disking at Orchards, Plantations and Wineyards Cultivations.


Offset Disc Harrow is tractor hydraulic operated implement which trails behind the tractor and effectively breaks up clods with deeper penetration due to its heavy weight and design. Both disc gangs are offset at an angle to ensure no soil remains uncut and heavy crop residue with organic matter is effectively buried. Provision of handle screw enables it for the adjustment of inclination required for the disc penetration depth hence suitable for different cutting depths for varying soil conditions. Heavy duty sturdy mainframe with heavy duty spools and hardened discs ensure proper centerweight and longer life.

Special features

»	Sturdy Mainframe and design.
»	Handle Screw arrangement for cutting depth adjustment.
»	Hardened sharp edged discs to ensure proper cutting of roots and clods.
»	Easy to mount on tractor with three point linkages and easy to operate. MODELS & SPECIFICATIONS MODELS WIDTH in mm LENGTH in mm. HEIGHT in mm. WORKING CAPACITY in mm WEIGHT in Kgs. 10 Disc 1650 1550 1250 1150 310 11 Disc 1550 1800 1250 1420 340 12 Disc 2100 1500 1371 1250 355 14 Disc 2130 1803 1371 1450 410